Used in precision machinery where compact design and fine tooth engagement are required.
Employed in machinery to convert rotary motion into reciprocating, enabling precise control and synchronization of movements.
Used in industrial equipment like mining machinery and construction equipment to support .
Essential in precision engineering applications such as aerospace and medical devices.
Utilized in internal combustion engines and industrial valves to provide a sealing surface, enhancing fluid flow control.
Employed in consumer electronics and product packaging to securely and easily join components without need for fasterners.
Crucial in optics ensuring accurate alignment and performance in telescopes.
Vital in electronics to prevent electrical conduction and ensure safety, used in circuit boards, connectors.
| Performance and Test Conditiom | Test Method | Unit | Tyical Values |
| Notched impact strength of cantilever beam, 23°C | ASTM D256 | J/m | 10 |
| Yield tensile strength, 23°C, 50mm/min | ASTM D638 | Mpa | 60 |
| Elongation at break, 23°C, 50mm/min | ASTM D638 | % | 25 |
| The bending strength. 23C, 2mm/min | ASTM 790 | Mpa | 70 |
| Bending modulus, 23°C, 2mm/min | ASTM 790 | Mpa | 2500 |
| Shore hardness D | ASTMD2240 | – | 85 |
| The Density | ISO 1183 | g/cm3 | 1.42 |
| Performance and Test Conditiom | Test Method | Unit | Tyical Values |
| Thermal deformation temprature(HDT) (0.45Mpa) | ISO 75 | °C | 120 |
| Melting point | – | °C | 170 |
| Long term operating temperature | – | °C | 100 |
| Short-term operating temperature | – | °C | 120 |
| Thermal conductivity | DIN 52612-1 | W/(K-M) | 0.33 |
| Linear expansion coefficient | ASTM D696 | 10-5-1/K | 13 |
| Performance and Test Conditiom | Test Method | Unit | Tyical Values |
| Dielectric strength | ASTM D150 | KV-mm | 19 |
| Dielectric loss coefficient | ASTM D150 | – | 0.007 |
| The volume resistance | ASTM D257 | Ω.cm | 1015 |
| The surface resistance | ASTM D257 | Ω | 1015 |
| Dielectric constant | ASTM D149 | – | 3.7 |